| |
Repsol Super Tauro Sintetico 320
Description
High performance lubricant fluids. Formulated using specially selected synthetic bases (PAO, ¨¦steres) and top of the range additives, ideal for applications operating under severe working conditions:heavy loads, low velocities and high/low temperatures.
Recommended uses
Bearings and industrial gearboxes operating under severe conditions (heavy loads and low speeds)and at a wide range of temperatures. Includes all those systems which lubricated by forced oil circulation, drop or cup method. Particularly suitable when operating at high temperatures as the oxidation resistance permits the gap between changes to be extended, thereby saving on oil change costs, applications cleaning and stoppages.
Properties
Exceptional oxidation resistance at high temperatures.
Extremely low freeze point, allowing it to work at low temoeratures.
Very high viscosity index, allowing for lubrication at a wide range of temperatures.
Lower friction quotient than conventional oils,as a result of which consumption potential is reduced.
Seals, joints and conventional paints compatibility.
Miscible with mineral oils.
Excellent water separating and anti-foam properties.
High protection against rust and corrosion.
Optimum E.P. properties.
Quality level
DIN-51517 Part 3 CLP AGMA 9005-D94
ISO 6743/6 ¨C CKC Cincinnati Milacron P-35 (ISO-460),
P-59 (ISO-320), P-76
U. S. Steel 224 (ISO-100), P-77 (ISO-150) y P-74 (ISO-220).
Technical Characteristics
|
UNIT |
METHOD |
VALUE |
VALUE |
VALUE |
VALUE |
VALUE |
ISO VG Grade |
|
|
100 |
150 |
220 |
320 |
460 |
Viscosity, 100¡İC |
cSt |
ASTM D 445 |
14,5 |
21 |
26,7 |
5,5 |
46 |
Viscosity, 40¡İC |
cSt |
ASTM D 445 |
100 |
150 |
220 |
320 |
460 |
Viscosity Index |
|
ASTM D 2270 |
150 |
153 |
156 |
158 |
160 |
Flash Point |
¡İC |
ASTM D 92 |
205 |
205 |
205 |
210 |
215 |
Pour Point |
¡İC |
ASTM D 97 |
-54 |
-51 |
-42 |
-42 |
-39 |
Demulsibility, free
water |
Cm3 |
ASTM D 2711 |
80 |
80 |
80 |
80 |
80 |
Demulsibility,
mulsibility |
Cm3 |
ASTM D 2711 |
1 |
1 |
1 |
1 |
1 |
Timkem OK |
Lb |
ASTM D 2782 |
70 |
70 |
70 |
70 |
70 |
Rust, method A |
|
ASTM D 65 |
Pass |
Pass |
Pass |
Pass |
Pass |
FZG, stage 12 |
|
DIN 51354 |
Pass |
Pass |
Pass |
Pass |
Pass |
Available in
ISO 220: 40 and 160 Kg. drums
ISO 100,150,320y 460: 40 Kg. drums
Hazard Identification
This product is not classified as toxic or hazardous under current legislation.
Handling
Certain minimum precautions to avoid prolonged contact with the skin should be taken when handling. The use of gloves, visors or masks is recommended in order to avoid splashes.
Health and safety hazards
Inhalation: Minimum risk of inhalation as it is a non-volatile product.
Ingestion: Does not provoke vomiting. Drink water. Seek medical assistance.
Contact with Skin: Wash with abundant water and soap.
Eyes: Wash with abundant water.
General measures: Seek medical assistance.
Fire fighting measure
No special measures are required.
Fire control: Foams, dry chemicals, CO2, water spray. Do not apply water jet directly as this may cause the product to spread.
Environmental precautions
Danger of physical contamination in the case of spillage (water flows, coastal areas, the ground, etc.) due to its floating capacity and oily consistency which may cause damage to fauna and flora with which it comes into contact. Avoid its penetration into water containers or outlets.
Decontamination and cleaning: Treat as an accidental oil spillage. Avoid spreading by using mechanical barriers and eliminate using both physical and chemical means. |
|
